Our company offers the diverse spectrum professional sectors coatings for protection came from corrosion, which could be interesting to large industrial giants, and the industry average and small business.

Corrosion resistant materials

CHERAL-01
Anticorrosive, inorganic, zinc-silica covers new generation


Cheral-01 is applied as enduring protective coating of corrosion to metal grounds, as well as to restore galvanized service steel elements, providing three-tier protection metals: cathode (active), barrier (passive) and inhibitoric. The basic mechanism for the protection, due to high zinc content, is the principle cathodes protection, a similar hot galvanized. Has high electro conduction, excellent combined with cathodes protection system and with expendable anode. Provides the cathode protection on sites with damaged coating. In the short time is solid water enduring electro conduction coverage, with an electric contact with the protected metal. Provides electrochemical protective effect and eliminates under envelope corrosion. Provides barrier increased resistance to mechanical damage, has high adhesive strength and increased tolerance to resistance. Has unaccented characteristic and very good opportunities for clean-up of pollution

Type: two componentization solidified zinc-silica coverage.

Color: Gray (MAT).
Density: ready to use paints, land-mines. 3, 2 g/cm3, solidified the mines. 1, 05 g/cm3.
Dry matter content: more than 80% by mass.
Time drying layer to the point 2: maximum -3. at a temperature 22с. There are no harmful evaporation, are allocated only pairs water.
Recommended thickness Coatings: the smooth, without pitting, cleansed grit blasting or abrasive blasting means steel-100 μm with a minimum m; 150 μm with minimum thickness 125 µm to rough, with pitting,thickness 80 cleansed grit blasting or abrasive blasting means steel. The minimum thickness Primers in combined systems is 65 µm to smooth, without pitting, cleansed grid or abrasive blasting means steel.
Temperature: Allowed temperature of causing +5с to +35с, temperature pads should be above dew point at least 30c.
Dependency time full solidifying film of temperatures: At a temperature below + 15с and relative humidity above 85% Time full solidifying is increasing, relative humidity and temperature measured in within the time solidifying.
Potlife: 8 hours at a temperature 22с.
Current interval causing include paints: Minimum is 24 hours, maximum not limited, provided surface cleaning of dirt and salts zinc.
Evidence: dry film can solidified corresponding 100 ml/m2..
Recommended types of the substrates: cleared of rust, scale, oil and other organic contaminants steel on standard ISO-sa2 1/2, 26PF 40-70мкм.
Recorded average expense: in depth cover 100 micron theory expense of paints, 400 g/m2. For other thickness cover proportion depends on the configuration and protected object in the organizations of works. Maximum thickness of layer coverage at the pneumatic's is 90 mkm, maximum thickness to paint brush method in colouring 100мкм.
Additional data: Consumption absorption depended on means of inflicting, thickness cover, and the extent of surface, design and other parameters. The comparison with protector protection, consumption zinc sharply decreased by partial closure has metal surface. Extremely valuable informative leadership, and in the sectors of the international standard is 12944-98 «Plant steel structures systems protective covering», ISO 1058-1 ISO 1058-01-1988, ISO 4058th-1992 «Determination accurate degree removing rust and cleaning steel surface before painting»
Period of service:-Depending on Thickness cover. РИ thickness cover 120 Mikron terms of duty in the atmosphere is less than 30 years, in the marine water 6-8 years.
Payment causing: Training surface painted products for this type coatings standard: directing aircraft and air are dispersed. Equipment cleaning by water. Years of Operation cover directly proportional to the extent of surface. Losses to inflict «Cheral-01» can be from 5 to 25 per cent and depends, first and foremost, from technology causing.

ZHSK-1467
Paints and coverage at its basis, long-term protection against corrosion in heavily aggressive environment

ZHSK 1467 (TU 2310-014-50316079-2004) zinc highly, one packaging paint on the basis chemically modified resistant rubber.

Application:
- Marine atmosphere categories Placement 1 3 on art ACC; 
- Industrial atmosphere secondary and strong aggressiveness gases with normal and high humidity zone in accordance with the requirements and the 2.03.11-85;
- Marine and river water, aqueous solutions with salts r 3-12, and from acid detergents; oil and petroleum products, industrial lagoons and waste water;
- Lower alcohols and aliphatic (surface) hydrocarbons;
Protected sites: metalstructures, chemical, metallurgical and other equipment and products made of carbon and – steels, and also reinforced concrete building designs. Region is used as an autonomous cover OR IN COMPLEX SYSTEMS protection as as layer under mounted segments varnishes and enamels: CS; ХСК; ЭП-773; ХВ-785; ХВ-124; Дельта PRO -510 (ЭП-5287) and others. Opening ZHSK-1467 suitable for welding in a subtle layer (30-40 mkm), maintains thermal gradient from minus 50 ºC to plus 120 ºC
Primary characteristic of paint ZHSK-1467
- Mass portion not volatile substances,% (mass) 75-85
- Conditional viscosity of viscositymetr VZ-246 with diameter nozzles 4 mm with (20±5) ºC 30-50 min.
- Theoretical consumption at one layer thickness 30-40 mkm 180 g\m
thickness 60-80 mkm 250 g\m
- Duration drying one layers cover up to the 3, with (20±2) ºC and 65% relative humidity, mines, no more: -thickness 30-40 mkm; 30
-thickness 60-80 mkm; 40-50
Guaranteed shelf life: 12 months.
Main characteristics of the surface ZHSK-1467
- Appearance dark gray opaque, smooth  
- Adhesion to metal, score 1
- Strength blow, see, no less 50 
- Elasticity, bending, mm, no more than 3
The steel surface: Payment mechanical, ink-jet clean-up, and the mandatory degreasing in accordance with GOST 9.402-80
Temperature causing paints: from 0 ˚с to plus 30 ˚с.
Package: euro bucket metallic (10L)-20 kg.